Full list (with presentations)

Use these links to jump down to the headings on this page

Journal Papers
Conference Proceedings
Patents
Other presentations

Books

NERVEGNA N., RUNDO M. "Passi nell'Oleodinamica", edizioni EPICS, Torino, 2020. ISBN 9788894802153.

Journal Papers

CASOLI P., VESCOVINI C.M., MASOUD H.G., RUNDO M. "A Novel 1D Approach for Modelling Gas Bladder Suppressors on the Delivery Line of Positive Displacement Pumps", Energies, 17(7), 1610, 2024. DOI: 10.3390/en17071610. OPEN ACCESS. Scopus: 2-s2.0-85190297024. WOS:
CORVAGLIA A., RUNDO M., BONATI S., RIGOSI M. "Simulation and Experimental Activity for the Evaluation of the Filling Capability in External Gear Pumps", Fluids, 8(9), 251 - Special Issue "Selected Papers from the 2022 IEEE Global Fluid Power Society PhD Symposium (GFPS 2022)", 2023. DOI: 10.3390/fluids8090251. eISSN: 2311-5521. OPEN ACCESS. Scopus: 2-s2.0-85172110694. WOS:001075682500001.
CASOLI P., VESCOVINI C.M., RUNDO M. "Modelling of an In-Line Bladder-Type Hydraulic Suppressor for Pressure Ripple Reduction in Positive Displacement Pumps", Machines, 11(6), 620 - Special Issue "Components of Hydrostatic Drive Systems", 2023. DOI: 10.3390/machines11060620. eISSN: 2075-1702. OPEN ACCESS. Scopus: 2-s2.0-85163878947. WOS:001017302100001.
CASOLI P., VESCOVINI C.M., RUNDO M. "One-Dimensional Fluid Dynamic Modeling of a Gas Bladder Hydraulic Damper for Pump Flow Pulsation", Energies, 16(8), 3368 - Special Issue "Application and Analysis in Fluid Power Systems Ⅱ", 2023. DOI: 10.3390/en16083368. eISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85156171220. WOS:000978863200001.
FERRARI A., FRESIA P., RUNDO M., VENTO O., PIZZO P. "Experimental Measurement and Numerical Validation of the Flow Ripple in Internal Gear Pumps", Energies, 15(24), 9607 - Special Issue "Application and Analysis in Fluid Power Systems Ⅱ", 2022. DOI: 10.3390/en15249607. eISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85144634981. WOS:000900855000001.
CASOLI P., SCOLARI F., VESCOVINI C.M., RUNDO M. "Theoretical Analysis of Active Flow Ripple Control in Positive Displacement Pumps", Energies, 15(13), 4703 - Special Issue "Application and Analysis in Fluid Power Systems", 2022. DOI: 10.3390/en15134703. eISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85129969577. WOS:000824174400001.
FRESIA P., RUNDO M., PADOVANI D., ALTARE G. "Combined speed control and centralized power supply for hybrid energy-efficient mobile hydraulics", Automation in Construction, 140, 104337, 2022. DOI: 10.1016/j.autcon.2022.104337. ISSN 0926-5805. Scopus: 2-s2.0-85129969577. WOS:000802162200005.
CASOLI P., SCOLARI F., VESCOVINI C.M., RUNDO M. "Energy Comparison between a Load Sensing System and Electro-Hydraulic Solutions Applied to a 9-Ton Excavator", Energies, 15(7), 2583 - Special Issue "Application and Analysis in Fluid Power Systems", 2022. DOI: 10.3390/en15072583. eISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85128013526. WOS:000781920100001.
RUNDO M., CASOLI P., LETTINI A. "Experimental methods for measuring the viscous friction coefficient in hydraulic spool valves", Sustainability, 13(13), 7174 - Special Issue "Fluid Power Components and Systems", 2021. DOI: 10.3390/su13137174. eISSN: 2071-1050. OPEN ACCESS. Scopus: 2-s2.0-85109128050. WOS:000671957900001.
CASOLI P., SCOLARI F., RUNDO M. "Modelling and validation of cavitating orifice flow in hydraulic systems", Sustainability 13(13), 7239 - Special Issue "Fluid Power Components and Systems", 2021. DOI: 10.3390/su13137239. eISSN: 2071-1050. OPEN ACCESS. Scopus: 2-s2.0-85109386919. WOS:000671360100001.
CORVAGLIA A., RUNDO M., CASOLI P., LETTINI A. "Evaluation of Tooth Space Pressure and Incomplete Filling in External Gear Pumps by Means of Three-dimensional CFD Simulations", Energies 14(2), 342, Special Issue "Gear Pumps and Motors", 2021. DOI: 10.3390/en14020342. eISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85101623807. WOS: 000611205500001.
CORVAGLIA A., FERRARI A., RUNDO M., VENTO O. "Three-dimensional model of an external gear pump with an experimental evaluation of the flow ripple", Proc. IMechE Part C: J. Mechanical Engineering Science 235(6): 1097–1105, 2021. DOI:10.1177/0954406220937043. ISSN: 0954-4062. eISSN: 2041-2983. Scopus: 2-s2.0-85087769076. WOS: 000548563700001.
CASOLI P., SCOLARI F., RUNDO M., LETTINI A., RIGOSI M. "CFD Analyses of Textured Surfaces for Tribological Improvements in Hydraulic Pumps", Energies 13(21), 5799, 2020. DOI: 10.3390/en13215799. eISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85101606348. WOS:000588912300001.
CASOLI P., SCOLARI F., MINAV T., RUNDO M. "Comparative Energy Analysis of a Load Sensing System and a Zonal Hydraulics for a 9‐Tonne Excavator", Actuators 9(2), 39, Special Issue "Electro-Hydraulic Actuators", 2020. DOI:10.3390/act9020039. ISSN 2076-0825. OPEN ACCESS. Scopus: 2-s2.0-85086093487. WOS:000551235200002.
PADOVANI D., RUNDO M., ALTARE G. "The Working Hydraulics of Valve-Controlled Mobile Machines: Classification and Review", J. Dyn. Sys., Meas., Control, 142(7): 070801, 2020. DOI:10.1115/1.4046334. ISSN: 0022-0434, eISSN: 1528-9028. Scopus: 2-s2.0-85086109327. WOS:000536782600008.
CASOLI P., PASTORI M., SCOLARI F., RUNDO M. "Active Pressure Ripple Control in Axial Piston Pumps through High-Frequency Swash Plate Oscillations—A Theoretical Analysis", Energies 12(7), 1377, Special Issue "Energy Efficiency and Controllability of Fluid Power Systems 2018", 2019. DOI: 10.3390/en12071377. ISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85065471878. WOS:000465561400194.
CASOLI P., PASTORI M., SCOLARI F., RUNDO M. "A Vibration Signal-Based Method for Fault Identification and Classification in Hydraulic Axial Piston Pumps", Energies 12(5), 953, Special Issue "Energy Efficiency and Controllability of Fluid Power Systems 2018", 2019. DOI: 10.3390/en12050953. eISSN: 1996-1073. OPEN ACCESS. Scopus: 2-s2.0-85063048202. WOS:000462646700186.
RUNDO M., ALTARE G., CASOLI P. "Simulation of the Filling Capability in Vane Pumps", Energies 12(2), 283 - Special Issue "Energy Efficiency and Controllability of Fluid Power Systems 2018", 2019. DOI: 10.3390/en12020283. eISSN: 1996-1073. OPEN ACCESS. Awarded as Editor's Choice Article. Scopus: 2-s2.0-85060538745. WOS:000459743700084.
FERRARI A., PIZZO P., RUNDO M. "Modelling and experimental studies on a proportional valve using an innovative dynamic flow-rate measurement in fluid power systems", Proc. IMechE Part C: J. Mechanical Engineering Science 232(13): 2404–2418, 2018. DOI: 10.1177/0954406217721259. ISSN: 0954-4062. eISSN: 2041-2983. Scopus: 2-s2.0-85045458600. WOS:000438607000007.
RUNDO M., SQUARCINI R., FURNO F. "Modelling of a Variable Displacement Lubricating Pump with Air Dissolution Dynamics", SAE Int. J. Engines 11(2): 111-126, 2018. DOI: 10.4271/03-11-02-0008. ISSN: 1946-3936. e-ISSN: 1946-3944. Scopus: 2-s2.0-85048314731.
RUNDO M., ALTARE G. "Lumped Parameter and Three-Dimensional Computational Fluid Dynamics Simulation of a Variable Displacement Vane Pump for Engine Lubrication", ASME J. Fluids Eng. 140(6): 061101, 2018. DOI: 10.1115/1.4038761. ISSN: 0098-2202. eISSN: 1528-901X. Scopus: 2-s2.0-85041312609. WOS:000430073700001.
RUNDO M. "Models for Flow Rate Simulation in Gear Pumps: A Review", Energies 10(9), 1261, 2017. DOI:10.3390/en10091261. ISSN: 1996-1073. OPEN ACCESS. Awarded as Editor's Choice Article. Scopus: 2-s2.0-85028554071. WOS:000411225200017.
FINESSO R., RUNDO M. "Numerical and experimental investigation on a conical poppet relief valve with flow force compensation", Int. Journal of Fluid Power 18(2): 111-122, 2017. DOI: 10.1080/14399776.2017.1296740. ISSN: 1439-9776. eISSN: 2332-1180. Scopus: 2-s2.0-85014605640. WOS:000410800300004.
ALTARE G., RUNDO M. "Advances in simulation of gerotor pumps: An integrated approach", Proc. IMechE Part C: J. Mechanical Engineering Science 231(7): 1221-1236, 2017. DOI: 10.1177/0954406217694663. ISSN: 0954-4062. eISSN: 2041-2983. Scopus: 2-s2.0-85016261465. WOS:000398206700003.
RUNDO M. "Theoretical flow rate in crescent pumps", Simulation Modelling Practice and Theory 71: 1-14, 2017. DOI: 10.1016/j.simpat.2016.11.001. ISSN: 1569-190X. e-ISSN: 1878-1462. Scopus: 2-s2.0-84996551985. WOS: 000392768300001.
RUNDO M., CORVAGLIA A. "Lumped Parameters Model of a Crescent Pump", Energies 9(11), 876 - Special Issue "Energy Efficiency and Controllability of Fluid Power Systems", 2016. DOI: 10.3390/en9110876. OPEN ACCESS. ISSN: 1996-1073. Scopus: 2-s2.0-85007568822. WOS: 000388580000018.
ALTARE G., RUNDO M. "Computational Fluid Dynamics Analysis of Gerotor Lubricating Pumps at High Speed: Geometric Features Influencing the Filling Capability", ASME J. Fluids Eng. 138(11):111101, 2016. DOI: 10.1115/1.4033675. ISSN: 0098-2202. e-ISSN: 1528-901X. Scopus: 2-s2.0-84978676769. WOS:000385428000001.
RUNDO M., NERVEGNA N. "Lubrication Pumps for Internal Combustion Engines: a Review", Int. Journal of Fluid Power 16(2): 59-74, 2015. DOI: 10.1080/14399776.2015.1050935. ISSN: 1439-9776. Scopus: 2-s2.0-84942985131. WOS:000218030600001.
ALTARE G., PADOVANI D., NERVEGNA N. “A Close-up View of a Load Sensing "Hybrid" PDCV”, Transactions of the Japan Fluid Power Systems Society 44(3): 64-73, 2013. DOI: 10.5739/jfps.44.64.
RUNDO M., SQUARCINI R. “Modelling and Simulation of Brake Booster Vacuum Pumps”, SAE Int. J. Commer. Veh. 6(1): 236-248, 2013. DOI:10.4271/2013-01-9016. ISSN:1946-391X. Scopus: 2-s2.0-84878754608.
ALTARE G., LOVUOLO F., NERVEGNA N., RUNDO M. “Coupled Simulation of a Telehandler Forks Handling Hydraulics”, Int. Journal of Fluid Power 13(2):15-28, 2012. DOI: 10.1080/14399776.2012.10781050. ISSN: 1439-9776. Scopus: 2-s2.0-84865193391. Also in Italian as "Simulazione accoppiata del sistema idraulico di movimentazione delle forche di un telehandler", Oleodinamica Pneumatica, febbraio 2014.
RUNDO M. “Piloted Displacement Controls for ICE Lubricating Vane Pumps”, SAE Int. Journal of Fuels and Lubricants 2(2): 176-184, 2010. DOI: 10.4271/2009-01- 2758. ISSN 1946-3952. Scopus: 2-s2.0-77953050239. Also SAE paper 2009-01-2758 at SAE 2009 Powertrains, Fuels & Lubricant Meeting, November 2-4, 2009, San Antonio, TX, USA. PRESENTATION(.flv) (.mp4) (3.94 MB)
ROCCATELLO A., NERVEGNA N. “Mechanical Modelling of a bent axis pump”, Int. Journal of Fluid Power 10(2): 57-72, 2009, ISSN: 1439-9776. DOI: 10.1080/14399776.2009.10780978. Scopus: 2-s2.0-69949114548.
RUNDO M., SQUARCINI R. “Experimental Procedure for Measuring the Energy Consumption of IC Engine Lubricating Pumps during a NEDC Driving Cycle”, SAE Int. Journal of Engines 2(1): 1690-1700, 2009. DOI: 10.4271/2009-01-1919. ISSN 1946-3936. Scopus: 2-s2.0-84869166607. Also SAE paper 2009-01-1919 at SAE 2009 International Powertrains, Fuels and Lubricant Congress, June 15-17, Florence, Italy. PRESENTATION(.flv) (.mp4) (4.16 MB)
ROCCATELLO A., MANCO' S., NERVEGNA N. “Modelling a Variable Displacement Axial Piston Pump in a Multibody Simulation Environment”, Journal of Dynamic Systems, Measurement and Control, 129(4): 456-468, 2007, ISSN: 0022-0434, DOI: 10.1115/1.2745851. Scopus: 2-s2.0-34547821398.
RUNDO M., NERVEGNA N. “Geometry Assessment of Variable Displacement Vane Pumps”, Journal of Dynamic Systems, Measurement and Control 129(4): 446-455, 2007, ISSN: 0022-0434, DOI: 10.1115/1.2718245. Scopus: 2-s2.0-34547805539. WOS:000248139600008.
NERVEGNA N., MANCO' S., LETTINI A., GUIDETTI M. ”Zweikreisverstellpumpe in Axialkolbenbauart”, O + P . Olhydraulik und Pneumatik 7: 410-417, 2004, ISSN: 0341-2660.
DEMENEGO A., VECCHIATO D., LITVIN F.L., NERVEGNA N., MANCO' S. “Design and simulation of meshing of a cycloidal pump”, Mechanism and Machine Theory 37: 311-332, 2002, ISSN: 0094-114X. DOI: 10.1016/S0094-114X(01)00074-X. Scopus: 2-s2.0-0036497831.
MANCO' S., NERVEGNA N., RUNDO M. “A contribution to the design of hydraulic lube pumps”, Int. Journal of Fluid Power 3(1): 21-31, 2002, ISSN: 1439-9776. DOI: 10.1080/14399776.2002.10781125. Scopus: 2-s2.0-84992417576. Also in Italian as "Contributo al progetto di pompe oleodinamiche di lubrificazione”, Trasmissioni di Potenza Oleodinamica Pneumatica Lubrificazione, Vol 5 and 6, 2005, ISSN: 1122-5017.
MANCO' S., NERVEGNA N., RUNDO M. “Effects of timing and odd/even number of teeth on noise generation of gerotor lubricating pumps for IC Engines”, SAE Transactions, Journal of Commercial Vehicles 109(2), pp. 407-416, 2000, ISBN: 0-7680-0649-X, DOI: 10.4271/2000-01-2630. Scopus: 2-s2.0-85096946859. Also SAE Paper 2000-01-2630 presented at SAE International Off-Highway & Powerplant Congress & Exposition, 11-13 September, 2000, Milwaukee, WI, USA. Also in SAE Special Publication, Topics in Hydraulics (SP-1554). PRESENTATION(.flv) (.mp4) (993.88 kB)
MANCO' G., MANCO' S., RUNDO M., NERVEGNA N. “Computerized generation of novel gearings for internal combustion engines lubricating pumps”, Int. Journal of Fluid Power 1(1): 49:58, 2000, ISSN: 1439-9776. DOI: 10.1080/14399776.2000.10781082. Scopus: 2-s2.0-85016258323.
FABIANI M., MANCO' S., NERVEGNA N., RUNDO M. et al. “Modelling and simulation of gerotor gearing in lubricating oil pumps”, SAE Transactions, Journal of Engines 108(3): 989-1003, 1999, ISSN: 0096-736X, DOI: 10.4271/1999-01-0626. Scopus: 2-s2.0-84877196492. Also SAE paper 1999-01-0626 at SAE International Congress & Exposition, Mar. 1-4, 1999, Detroit, MI, USA.
MANCO' S., NERVEGNA N., RUNDO M. et al. “Gerotor Lubricating Oil Pump for IC Engines”, SAE Transactions, Journal of Engines 107(3): 2267-2284, 1998, ISSN: 0096-736X, DOI: 10.4271/982689. Scopus: 2-s2.0-85099487418. Also SAE paper 982689 at International Fall Fuels & Lubricants Meeting & Exposition, Oct. 19-22, 1998, San Francisco, CA, USA. PRESENTATION(.flv) (.mp4) (1.37 MB)
ZAROTTI G.L., NERVEGNA N. “Pump Efficiencies: Approximation and Modeling”, Fluidics Quarterly 14(3): 1-20, 1982, ISSN: 0015-4687. Scopus: 2-s2.0-0020175166.
ZAROTTI G. L., NERVEGNA N. “Better Hydraulic Systems Conceived via APL”, SAE Transactions, 1980. Also SAE paper 800672 presented at Earthmoving Industry Conference, Peoria, IL, 14-16 April, 1980, DOI: 10.4271/800672. Scopus: 2-s2.0-84877382872.
ZAROTTI G. L., NERVEGNA N. “Rational Design of Mobile Hydraulics by Digital Computer”, SAE Transactions, 1979. Also SAE paper 790847 at Off Highway Vehicle Meeting and Exposition, Mecca, Milwaukee, WI, 10-13 September, 1979, DOI: 10.4271/790847. Scopus: 2-s2.0-84877191920.
ZAROTTI G. L., NERVEGNA N. “Hydrostatics on Vehicles - Controlling and Sizing for Productivity”, SAE Transactions, 1979. Also SAE paper 790527 at Earthmoving Industry Conference, Peoria, IL, 23-25 April, 1979, DOI: 10.4271/790527. Scopus: 2-s2.0-84881217729.
ZAROTTI G. L., NERVEGNA N., MIOTTO G. “Hydrostatic Transmissions Controls - Is there space for optimization?”, SAE Transactions, 1978. Also SAE paper 780465 at Earthmoving Industry Conference, Peoria, IL, 10-12 April, 1978, DOI: 10.4271/780465. Scopus: 2-s2.0-84877162134.

Conference Proceedings

PADOVANI D., RUNDO M., FRESIA P., ALTARE G. "Energy analysis of a hybrid electro‐hydraulic system for efficient mobile hydraulics", Proceedings of the 78th Conference of the Italian Thermal Machines Engineering Association, ATI2023, 14-15 September, 2023, Carpi (MO), Italy. Journal of Physics: Conference Series 2648 012051, 2023. DOI: 10.1088/1742-6596/2648/1/012051. OPEN ACCESS. Scopus: 2-s2.0-85182260932. Presented by Damiano Padovani.
FRESIA P., RUNDO M., BRIGNOLO G., FERRARESE G. "CFD Modelling of an Internal Gear Pump for High Viscosity Fluids", Proceedings of the ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE2023, 43th Computers and Information in Engineering Conference, Aug. 20-23, 2023, Boston, MA, USA. Paper no. IDETC2023-111589. DOI: 10.1115/DETC2023-111589. ISBN: 978-0-7918-8729-5. Scopus: 2-s2.0-85178511650. Presented by Massimo Rundo.
FRESIA P., RUNDO M. "Analysis of the flow rate through rotating shafts in lubricating circuits", 23rd Australasian Fluid Mechanics Conference, 4-8 December, 2022, Sydney, Australia. OPEN ACCESS (.pdf). ISSN: 2653-0597. Presented by Massimo Rundo.
CORVAGLIA A., RUNDO M., BONATI S., RIGOSI M. "Simulation Model of a Helical Gear Pump for the Evaluation of the Filling Capability", Proceedings of the IEEE Global Fluid Power Society PhD Symposium, 12-14 October, 2022, Napoli, Italy. Presented by Alessandro Corvaglia.
PADOVANI D., FRESIA P., RUNDO M., ALTARE G. "Downsizing the electric machines of energy-efficient electro-hydraulic drives for mobile hydraulics", Proceedings of the 77th Conference of the Italian Thermal Machines Engineering Association, ATI2022, 12-14 September, 2022, Bari, Italy. Journal of Physics: Conference Series 2385 012028, 2022. DOI: 10.1088/1742-6596/2385/1/012028. OPEN ACCESS. Scopus: 2-s2.0-85146493239. Presented by Damiano Padovani.
FRESIA P., RUNDO M. "CFD Simulation of a Post-Compensated Load Sensing Directional Control Valve", Proceedings of the 76th Conference of the Italian Thermal Machines Engineering Association, ATI2021, 15-17 September, 2021, Web edition, Italy. E3S Web Conf. 312, 2021. DOI: 10.1051/e3sconf/202131205002. OPEN ACCESS. Scopus: 2-s2.0-85146482523. Presented remotely by Paola Fresia (.mp4) (1.45 MB).
RUNDO M., FRESIA P. "CFD Analysis of a Pressure Compensator for Variable Displacement Pumps", 22nd Australasian Fluid Mechanics Conference, 7-10 December, 2020, Brisbane, Australia. DOI: 10.14264/44f591d. OPEN ACCESS. ISBN: 9781742723419. Scopus: 2-s2.0-85146475153. Presented remotely by Massimo Rundo (.mp4) (1.88 MB)
FRESIA P., RUNDO M. "Lumped parameter model and experimental tests on a pressure limiter for variable displacement pumps", Proceedings of the 75th Conference of the Italian Thermal Machines Engineering Association, ATI2020, 15-16 September, 2020, Rome, Italy. E3S Web Conf. 197, 2020. DOI: 10.1051/e3sconf/202019707005. Scopus: 2-s2.0-85097152999. Presented remotely by Paola Fresia (.mp4) (2.24 MB)
RUNDO M., CORVAGLIA A. "Simulation and testing of a hydraulic winch", Proceedings of the 74th Conference of the Italian Thermal Machines Engineering Association, ATI2019, 11-13 September, 2019, Modena, Italy. AIP Conference Proceedings 2191, 020135, 2019. DOI: 10.1063/1.5138868. Scopus: 2-s2.0-85077851020. Presented by Alessandro Corvaglia (.mp4) (1.87 MB)
CORVAGLIA A., ALTARE G., FINESSO R., RUNDO M. "Computational Fluid Dynamics Modelling of a Load Sensing Proportional Valve", Proceedings of the 8th ASME-JSME-KSME 2019 Joint Fluids Engineering Conference (AJKFLUIDS2019), Jul 28-Aug 1, 2019, San Francisco, CA, USA. Paper no. AJKFLUIDS2019-4708. DOI: 10.1115/AJKFluids2019-4708. ISBN: 978-0-7918-5902-5. Scopus: 2-s2.0-85076442839. WOS:000511223600035. Presented by Massimo Rundo (.mp4) (1.01 MB)
RUNDO M., ALTARE G. "CFD Studies on the Radial Feeding in High-Speed Vane Pumps", 21st Australasian Fluid Mechanics Conference, 10-13 December, 2018, Adelaide, Australia. (.pdf). ISBN: 978-064659784-3. Scopus: 2-s2.0-85060513238. Presented by Massimo Rundo (.mp4) (1.93 MB)
CORVAGLIA A., RUNDO M. "Comparison of 0D and 3D Hydraulic Models for Axial Piston pumps", Proceedings of the 73th Conference of the Italian Thermal Machines Engineering Association, ATI2018, 12-14 September, 2018, Pisa, Italy. Energy Procedia 148: 114-121, 2018. DOI: 10.1016/j.egypro.2018.08.038. OPEN ACCESS. ISSN: 1876-6102. Scopus: 2-s2.0-85056578969. Presented by Alessandro Corvaglia (.mp4) (1.47 MB)
RUNDO M., PAVANETTO M.A. "Comprehensive Simulation Model of a High Pressure Variable Displacement Vane Pump for Industrial Applications", Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE), 38th Computers and Information in Engineering Conference, Aug. 26-29, 2018, Quebec City, QC, Canada. Paper no. DETC2018-85099, Vol. 1A. DOI: 10.1115/DETC2018-85099. ISBN: 978-0-7918-5172-2. Scopus: 2-s2.0-85056830798. Presented by Massimo Rundo (.mp4) (3.15 MB)
RUNDO M., ALTARE G. "Comparison of Analytical and Numerical Methods for the Evaluation of the Flow Forces in Conical Poppet Valves with Direct and Reverse Flow", Proceedings of the 72th Conference of the Italian Thermal Machines Engineering Association, ATI2017, September 6-8, 2017, Lecce, Italy. Energy Procedia 126:1107-1114, 2017. DOI: 10.1016/j.egypro.2017.08.261. OPEN ACCESS. ISSN 1876-6102. Scopus: 2-s2.0-85030710482. WOS:000426884100140. Presented by Giorgio Altare (.mp4) (2.88 MB). A shorter version is also in Italian as "Metodi di simulazione delle forze di flusso in valvole a otturatore conico", La Termotecnica, dicembre 2017, pp.60-63.
RUNDO M., ALTARE G. "Lumped Parameter and Three-Dimensional CFD Simulation of a Variable Displacement Vane Pump for Engine Lubrication", Proceedings of the ASME 2017 Fluids Engineering Division Summer Meeting (FEDSM), 29th Symposium on Fluid Machinery, Jul. 30-Aug. 3, 2017, Waikoloa, HI, USA. Paper no. FEDSM2017-69124, Vol. 1A. DOI: 10.1115/FEDSM2017-69124. ISBN: 978-0-7918-5804-2. Scopus: 2-s2.0-85029389332. WOS:000417223800019. Presented by Massimo Rundo (.mp4) (2.52 MB)
ALTARE G., RUNDO M., OLIVETTI M. "3D Dynamic Simulation of a Flow Force Compensated Pressure Relief Valve", Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Nov. 11-17, 2016, Phoenix, AZ, USA. Paper no. IMECE2016-65624. DOI: 10.1115/IMECE2016-65624. ISBN: 978-0-7918-5061-9. Scopus: 2-s2.0-85021685926. WOS: 000400877800061. Presented by Massimo Rundo (.mp4) (1.80 MB)
ALTARE G., RUNDO M. "CFD Analysis of gerotor lubricating pumps at high speed: geometric features influencing the filling capability", Proceedings of the ASME/BATH 2015 Symposium on Fluid Power and Motion Control (FPMC), Oct. 12-14, 2015, Chicago, IL, USA. Paper no. FPMC2015-9539. DOI: 10.1115/FPMC2015-9539. Scopus: 2-s2.0-84964403756. WOS: 000373970500024. Presented by Massimo Rundo (.mp4) (4.80 MB)
RUNDO M. "On the Dynamics of Pressure Relief Valves with External Pilot for ICE Lubrication", Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE), Nov. 14-20, 2014, Montreal, Quebec, Canada. Paper no. IMECE2014-37973, Vol. 4B, ISBN: 978-0-7918-4648-3, DOI: 10.1115/IMECE2014-37973. Scopus: 2-s2.0-84926442383. WOS: 000380413200005. Presented by Massimo Rundo (.mp4) (3.37 MB)
CARCONI G., D’ARCANO C., NERVEGNA N., RUNDO M “Geometric Features of Gerotor Pumps: Analytic vs Cad Methods”, presented at Bath/ASME Symposium on Fluid Power & Motion Control (FPMC 2012), Sept. 12-14, 2012, Bath, UK. Fluid Power and Motion Control, Johnston and Plummer Editors, Bath, pp. 59-78, ISBN 9780861971879. Presented by Massimo Rundo and Cristian D'Arcano (.mp4) (13.34 MB)
ALTARE G., PADOVANI D., NERVEGNA N. “A commercial excavator: Analysis, modelling and simulation of the hydraulic circuit”, SAE Technical Paper 2012-01-2040 presented at SAE 2012 Commercial Vehicle Engineering Congress, Oct. 2-3, 2012, Rosemont, IL, USA, ISSN 0148-7191. DOI: 10.4271/2012-01-2040. Scopus: 2-s2.0-84881199525. Presented by Gabriele Altare (.mp4) (5.65 MB)
RUNDO M., SQUARCINI R. “Discrete Pressure Controls in IC Engine Lubricating Pumps”, Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Nov. 11-17, 2011, Denver, CO, USA. Paper no. IMECE2011-62525, Vol. 9, pp. 147-154, ISBN: 978-0-7918-5495-2. DOI: 10.1115/IMECE2011-62525. Scopus: 2-s2.0-84869150987. WOS: 000324716700016. Presented by Massimo Rundo (.mp4) (3.74 MB)
RUNDO M. “Energy Consumption in ICE Lubricating Gear Pumps”, SAE Technical Paper 2010-01-2146 presented at 2010 SAE Powertrains, Fuels & Lubricant Meeting, Oct. 25-27, 2010, San Diego, CA, USA. DOI: 10.4271/2010-01-2146. Scopus: 2-s2.0-84877204252. Presented by Massimo Rundo (.mp4) (2.25 MB)
ROCCATELLO A., MANCO' S., NERVEGNA N. “Modelling a Variable Displacement Axial Piston Pump in a Multibody Simulation Environment”, ESDA2006-95806, presented at ASME 8th Biennial Conference on Engineering Systems Design and Analysis, Torino, Italy, July 4-7, 2006, Vol. 2, pp. 819-829, ISBN: 0-7918-4249-5, DOI: 10.1115/ESDA2006-95806. Scopus: 2-s2.0-33845892162. Presented by Alessandro Roccatello (.mp4) (3.91 MB)
RUNDO M., NERVEGNA N. “Geometry assessment of variable displacement radial pumps”, ESDA2006-95807, presented at ASME 8th Biennial Conference on Engineering Systems Design and Analysis, Torino, Italy, July 4-7, 2006, Vol. 2, pp. 831-841, ISBN: 0-7918-4249-5, DOI: 10.1115/ESDA2006-95807. Scopus: 2-s2.0-33845809640. Presented by Massimo Rundo (.mp4) (3.75 MB)
GILARDINO L. “Test rig for experimental investigations on motion control valves”, ESDA2006-95804, presented at ASME8th Biennial Conference on Engineering Systems Design and Analysis, Torino, Italy, July 4-7, 2006, Vol. 2, pp. 807-818, ISBN: 0-7918-4249-5, DOI: 10.1115/ESDA2006-95804. Scopus: 2-s2.0-33845730838. Presented by Luca Gilardino.
MANCO' S., NERVEGNA N., RUNDO M., ARMENIO G. “Modelling and Simulation of Variable Displacement Vane Pumps for IC Engine Lubrication”, SAE Technical Paper 2004-01- 1601, presented at SAE World Congress, March 8-11, 2004, Detroit, MI, USA, DOI: 10.4271/2004-01-1601. Scopus: 2-s2.0-84877186083. Presented by Massimo Rundo (.mp4) (2.80 MB)
MANCO' S., NERVEGNA N., RUNDO M., ARMENIO G. “Displacement vs flow control in IC Engines lubricating pumps”, SAE Technical Paper 2004-01-1602, presented at SAE World Congress, March 8-11, 2004, Detroit, MI, USA, DOI: 10.4271/2004-01-1602. Scopus: 2-s2.0-84859365599. Presented by Massimo Rundo (.mp4) (3.02 MB) . Also in Italian as "Pompa a palette o a ingranaggi per la lubrificazione?", Oleodinamica e Pneumatica, maggio 2014, pp. 56-72.
FURNO F. “The Lubrication Network in Internal Combustion Engines: a Simulation Approach”, presented at 3rd FPNI PhD Symposium, Terrassa, Spain, June 30 – July 2, 2004. Presented by Francesca Furno (.mp4) (3.57 MB)
ROCCATELLO A. "Analysis, simulation and experiments on a proportional flow control valve", presented at 3rd FPNI PhD Symposium, Terrassa, Spain, June 30 – July 2, 2004. Presented by Alessandro Roccatello
MANCO' S., NERVEGNA N., BRUNELLI M. “Modelling the ABS/ESP electro-hydraulic system for vehicle stability control”, presented at The 18th International Conference on Hydraulic and Pneumatics, Prague, Czech Rep., Sep. 30 - Oct. 1, 2003, pp. 422-437, ISBN: 80-02-01567-3. Presentation (.mp4) (4.44 MB)
MANCO' S., NERVEGNA N., LETTINI A., COLELLA L. “Simulation of a split delivery pump”, presented at The 18th International Conference on Hydraulics and Pneumatics, Prague, Czech Rep., Sep. 30 - Oct. 1, 2003, pp. 448-461, ISBN: 80-02-01567-3.
FURNO F., GILARDINO L. “Banco prova per la caratterizzazione stazionaria e dinamica di valvole overcenter”, presented at 58° Congresso Annuale ATI, Padova - S. Martino di Castrozza, Italy, Sep. 9-12, 2003, Vol. 2, pp. 1329-1340, ISBN: 88-86281-83-8. Presented by Luca Gilardino (.mp4) (2.84 MB)
COLELLA L., LETTINI A., MANCO' S., NERVEGNA N., GUIDETTI M. “Ottimizzazione della distribuzione di una pompa a stantuffi assiali a doppia mandata”, presented at 58° Congresso Annuale ATI, Padova - S. Martino di Castrozza, Italy, Sep. 9-12, 2003, Vol. 2, pp. 1317-1328, ISBN: 88-86281-83-8. Presented by Luca Colella (.mp4) (4.54 MB)
FURNO F., RUNDO M. “Simulazione del sistema di lubrificazione di un motore a combustione interna”, presented at 58° Congresso Nazionale ATI, Padova - S. Martino di Castrozza, Italy, Sep. 9-12, 2003, Vol. 2, pp. 1097-1108, ISBN: 88-86281-83-8. Presented by Francesca Furno (.mp4) (2.26 MB)
RUNDO M. “Analisi della potenza persa in pompe volumetriche di lubrificazione”, presented at 58° Congresso Nazionale ATI, Padova - S. Martino di Castrozza, Italy, Sep. 9-12, 2003, Vol. 2, pp. 1355-1366, ISBN: 88-86281-83-8. Presented by Massimo Rundo (.mp4) (1.91 MB)
MANCO' S., NERVEGNA N., BRUNELLI, M. “Modello dell’unità idraulica ABS/VDC per il controllo della stabilità del veicolo”, presented at 58° Congresso Annuale ATI, Padova - S. Martino di Castrozza, Italy, Sep. 9-12, 2003, Vol. 2, pp. 1257- 1268, ISBN: 88-86281-83-8. Presented by Marco Brunelli (.mp4) (2.41 MB)
LETTINI A., COLELLA L., MANCO' S., NERVEGNA N., GUIDETTI M. “Studio e simulazione numerica del limitatore di coppia di una pompa a stantuffi assiali”, presented at 58° Congresso Annuale ATI, Padova - S. Martino di Castrozza, Italy, Sep. 9-12, 2003, Vol. 2, pp. 1341-1353, ISBN: 88-86281-83-8. Presentation (.mp4) (2.45 MB)
VECCHIATO D., MANCO' S., NERVEGNA N. “Metal Sheet Hydroforming: selection, modelling and simulation of the feed system”, presented at The 8th Scandinavian International Conference on Fluid Power, Tampere, Finland, May 7-9, 2003, Vol. 2, pp. 1035-1049, ISBN: 952-15-0972-4.
MANCO' S., NERVEGNA N., RUNDO M., MARGARIA M. “Miniature Gerotor Pump Prototype for Automotive Applications”, presented at 3rd International Fluid Power Conference, Aachen, Germany, March 5-6, 2002, Vol. 2, pp. 153-167. Presentation (.mp4) (3.69 MB)
GILARDINO L., MANCO' S., NERVEGNA N., PAVANETTO M.A. “Flow Amplifiers in Hydrostatic Steering”, SAE Technical Paper 2002-01-1358, presented at SAE International Off- Highway & Powerplant Congress , Las Vegas, NV, USA, March 19-21, 2002, DOI: 10.4271/2002-01-1358. Scopus: 2-s2.0-84877557179. Presentation (.mp4) (3.09 MB)
MANCO' S., NERVEGNA N., LETTINI A., GILARDINO L. “Advances in the simulation of axial piston pumps”, presented at 5th JFPS International Symposium on Fluid Power, Nara, Japan, Nov. 12-15, 2002, Vol. 1, pp. 251- 258, ISBN: 4-931070-05-3. DOI: 10.5739/isfp.2002.251. Presentation (.mp4) (3.49 MB)
NERVEGNA N., MANCO' S., RUNDO M. “Variable Flow Internal Gear Pump”, presented at The 2001 ASME International Mechanical Engineering Congress and Exposition, New York, USA, Nov. 11-16, 2001, Vol. 2, pp. 1-12, ISBN: 0-7918-1942-6. DOI: 10.1115/IMECE2001/FPST-25009. Scopus: 2-s2.0-1542411581. Presentation (.mp4) (2.58 MB)
MANCO' S., NERVEGNA N., RUNDO M. “Critical Issues on Performance of Lubricating Gerotor Pumps at High Rotational Speed”, Proceedings of The 7th Scandinavian International Conference on Fluid Power, Lynkoping, Sweden, May 30-June 1, 2001, Vol. 2, pp. 23-38, ISBN: 91-7373-056-4. Presentation (.mp4) (2.87 MB)
NERVEGNA N., MANCO' S., RUNDO M., GILARDINO L. “Hydraulic components design”, presented at European AMESim User's Conference, Paris, France, May 26, 2000. Presentation (.mp4) (2.48 MB)
GILARDINO L., MANCO' S., NERVEGNA N., VIOTTO F. “An experience in simulation: the case of a variable displacement axial piston pump”, presented at 4th JHPS International Symposium on Fluid Power, Tokyo, Japan, Nov. 15-17, 1999, pp. 85-91, ISBN: 4-031070-04-3. DOI: 10.5739/isfp.1999.85. Presentation (.mp4) (3.01 MB)
MANCO' G., MANCO' S., NERVEGNA N., RUNDO M. “Generazione computerizzata di nuovi profili di pompe di lubrificazione per motori a combustione interna”, presented at 54° Congresso Nazionale ATI, L’Aquila, Italy, Sep. 14-17, 1999, Vol. 2, pp. 945-959, ISBN: 88-86281-43-9.
MANCO' S., NERVEGNA N., RUNDO M. “Influenza della velocità di rotazione sul comportamento delle pompe di lubrificazione dei motori a combustione interna”, presented at 54° Congresso Nazionale ATI, L’Aquila, Italy, Sep. 14-17, 1999, Vol. 2, pp. 989-1000, ISBN: 88-86281-43-9.
GIUFFRIDA A., NERVEGNA N. “Analisi teorica delle oscillazioni di portata in una pompa a palette”, presented at 54° Congresso Nazionale ATI, L’Aquila, Italy, Sep. 14-17, 1999, Vol. 2, pp. 931-943, ISBN: 88-86281-43-9. Presentation (.mp4) (5.07 MB)
GILARDINO L., NERVEGNA N. “Simulazione di un argano ad azionamento idraulico”, presented at 54° Congresso Nazionale ATI, L’Aquila, Italy, Sep. 14-17, 1999, Vol. 2, pp. 961-971, ISBN: 88-86281-43-9.
RUNDO M., MANCO' S., NERVEGNA N. “Sulla valvola limitatrice di pressione nelle pompe volumetriche di lubrificazione dei motori a combustione interna”, presented at 53° Congresso Nazionale ATI, Firenze, Italy, Sep. 15-18, 1998, Vol. 2, pp. 1627-1638, ISBN: 88-86281-43-9. Presented by Massimo Rundo (.mp4) (2.75 MB)
GILARDINO L., NERVEGNA N., VIOTTO F. “Caratterizzazione stazionaria e dinamica dei controlli di variazione della cilindrata di pompa a pistoni assiali”, presented at 53° Congresso Nazionale ATI, Firenze, Italy, Sep 15-18, 1998. Presentation (.mp4) (1.85 MB)
MANCO' S., NERVEGNA N, FABIANI M.: “Il colpo di ariete in oleodinamica”, presented at 53° Congresso Nazionale ATI, Firenze, Italy, Sep. 15-18, 1998. Presentation (.mp4) (1.52 MB)
CARETTO R., MANCO' S., NERVEGNA N. RUNDO M. “Modelling, Simulation and Experimental Studies on a Variable Displacement Radial Piston Pump Prototype for Automotive Applications” , Proceedings of FPST International Mechanical Engineering Congress and Exposition, Atlanta, GA, USA, Nov. 17-22, 1996, Vol. 3, pp. 1-9, ISBN: 0-7918-1534-X. Scopus: 2-s2.0-0030408795. Presentation (.mp4) (963.90 kB)
MANCO' S., NERVEGNA N. “Theoretical and Experimental Studies on the Thermodynamic Efficiency of a Hydraulic Pump”, presented at FPST International Mechanical Engineering Congress and Exposition, San Francisco, CA, USA, Nov. 12-17, 1995, pp. 75-85, ISBN: 0-7918- 1729-6. Presentation (.mp4) (5.12 MB)
MANCÒ S., NERVEGNA N. “Pressure Transients in an external gear hydraulic pump”, presented at 2nd JHPS International Symposium on Fluid Power, Tokyo, Japan, Sep. 6 -9, 1993, pp. 221-228. DOI: 10.5739/isfp.1993.221. Presentation (.mp4) (4.53 MB)
MANCO' S., NERVEGNA N. “Experimental Investigation on the Efficiency of an external gear pump by the thermodynamic method” presented at 2nd Bath International Fluid Power Workshop on Components and Systems, Bath, UK, Sep. 21-22, 1989, pp. 259-273.
MANCO' S., NERVEGNA N. “Pilot Operated Pressure Reducer Valve - Computer Simulation vs Experimental Analysis”, Proceedings of the International Conference on Fluid Power Transmission and Control, Hangzhou, China, Mar. 20-22, 1989, pp. 520-525.
MANCO' S., NERVEGNA N. "Simulation of an external gear pump and experimental verification", 1st JHPS International Symposium on Fluid Power, Tokyo, Japan, Mar. 13-16, 1989, pp. 147-160. DOI: 10.5739/isfp.1989.147.
ZAROTTI G. L., NERVEGNA N. “Saturation Problems in Load-Sensing Architectures”, presented at National Conference on Fluid Power, NFPA and Fluid Power Society, Chicago, IL, USA, Oct. 11-13, 1988, pp. 393-402.
NEGRINI S., ZAROTTI G. L., NERVEGNA N. “Recirculating Brake Valve for Earthmoving Machines”, presented at 7th International Fluid Power Symposium, BHRA Fluids Engineering, Bath, UK, Sep. 16-18, 1986.
MANCO' S., NERVEGNA N. “Modello Matematico di Pompe Oleodinamiche a Ingranaggi Esterni”, presented at AIMETA, 8° Congresso Nazionale Associazione Italiana di Meccanica Teorica ed Applicata, Torino, Italy, Sep. 29 - Oct. 3, 1986, Vol. 1, pp. 353-360.
MITTICA A., ZAROTTI G. L., NERVEGNA N. “Modelling and Simulation of a Pressure Compensated System for Mobile Applications”, Proceedings of the 2nd International Symposium on applied modelling and simulation, Paris, France, June 29 - July 2, 1982.
ZAROTTI G. L., NERVEGNA N. “Pump Efficiencies Approximation and Modelling”, presented at 6th International Symposium on Fluid Power, BHRA Fluid Engineering, Cambridge, UK, Apr. 8-10, 1981, pp. 145-164, ISBN: 0-906085-53-5.
ZAROTTI G. L., NERVEGNA N. “Optimization of Hydraulic Systems - Part 1 Fundamentals”, The BFPR Journal, Fluid Power Research Center, 14th Fluid Power Research Conference, Stillwater, OK, USA, Oct. 1-9, 1980, Vol. 14, pp. 205-211.
ZAROTTI G. L., NERVEGNA N. “Optimization of Hydraulic Systems - Part 2 Applied Concepts”, The BFPR Journal, Fluid Power Research Center, 14th Fluid Power Research Conference, Stillwater, OK, USA, Oct. 1-9 , 1980, Vol. 14, no. 3, pp. 213-217.
RIGAMONTI G., ZAROTTI G. L., NERVEGNA N. “Cemoter X77 - A hydrostatic Research Vehicle”, SAE paper 780726, presented at Off-Highway Vehicle Meeting and Exposition, Mecca, Milwaukee, WI, USA, Sep. 11-14, 1978, DOI: 10.4271/780726. Scopus: 2-s2.0-84877385419.
ZAROTTI G. L., NERVEGNA N. “Hydrodynamic Transmissions Parameters Optimization”, SAE paper 770557 presented at SAE Earthmoving Industry Conference, Peoria, IL, USA, Apr. 18-20, 1977, DOI: 10.4271/770557. Scopus: 2-s2.0-84877385056.
ZAROTTI G. L., NERVEGNA N. “Hydraulic Torque Converters Design”, presented at 6th Australasian Hydraulics and Fluid Mechanics Conference, Adelaide, Australia, Dec. 5-9, 1977, pp. 386-390.

Patents

ARMENIO G., KIEFER C., RUNDO M. “Pumping system employing a variable-displacement vane pump”, ITBO20030528 (A1) and WO2005026553 (683.32 kB) (A1), 24 March 2005. Also published as EP1680602 (A1), 19 July 2006 and US20080038117 (A1), 14 Feb. 2008.

Full list (with presentations)

Books

Journal Papers

Conference Proceedings

Patents

Other presentations